Controller, WTC 200, Dialock, for indoor or outdoor use

for combination with WRU 200 and WRU 220 wall reader

Mains-operated, intelligent controller for online operation
Use as authorisation writer and/or wall terminal, block lock function
Selective actuation of up to 2 electrical devices
Plug & Play installation, creation of all system parameters on an SD card by the software
Authorisation writer for updating the authorisations at offline terminals
Display of operating statuses in the Dialock 2.0 software
Just-in-time change of authorisations
With integrated real-time clock for programming time-restricted locking rights (setting of time zones)
With logging of all procedures
With 4 inputs for evaluating input signals (e.g. reed contact for door monitoring). In combination with an electric strike or mortice lock with feedback contact, this allows visual overall monitoring of the status of, for example, the master key system
Configuration modifications and online firmware update with the Dialock 2.0 software

CPU: 32 bit 168 MHz Cortex M4
with slot for WTX 200 I/O expansion
Storage media: 1 x Micro SD card (optionally encrypted with 128 bit SSL), 512 kB Flash, 128 KB S-RAM

Connection between WRU 200/WRU 220 and WTC 200 electronic control unit with 4-core installation cable in accordance with VDE 0815: Type J-Y (St) Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 100 m, please contact a Dialock specialist if deviating from this.